Lysaght

Managing maintenance for all branches across Qld. This includes Capital projects, AAA Safety Projects, Contractor Management, teams management.

QLD State Maintenance Manager

Coca-Cola Amatil

Provide leadership for the plant's maintenance organization and serve on the plant's leadership team.  Responsible for managing and developing the maintenance team leads/supervisor and maintenance technicians; provides maintenance guidance and oversight for all plant associates.

Maintenance Team Manager

Wildbreads

Overseeing the development and implementation of manufacturing processes to maintain proper product functionality as well as cost efficiency; ensure the engineering team and other manufacturing departments work together cohesively and is responsible for the development of equipment to aid in the manufacturing process; lead and direct work of assigned manufacturing engineers and project engineers. Work closely with research and development, quality assurance and maintenance personnel to prevent problems with machinery, products and tooling/fixtures. Ensure all manufacturing safety regulatory policies and procedures are implemented and maintained at all times. Maintained and enforced a safe and clean working environment at all times.Ensuring ISO 9000, 22000 HACCP compliant. Coordinated closely with quality control, GMP Auditing, projects. Ensure that the company passes all audits. Determine and eliminate root causes and diminish occurrences in the manufacturing process. Responsible for training to meet the organisations safety policies. Mastered the intricacies of the process flow within each department. Coordinated preventative maintenance on existing and new production equipment, including routine calibration. Diligently maintained safety and quality standards. Implemented root cause and corrective actions to remove production constraints and improve product quality. Enforced a culture of lean manufacturing and continuous improvement while providing operational leadership. Improved efficiency and productivity by eliminating waste and production constraints. Trained, developed and counselled employees to develop a high performing team. Organised, prioritised and managed plant maintenance projects to keep facility safe, efficient and clean. Ad-Hoc Operations Manager, I have stood in as ops manager from time to time, to help in regards to driving manufacturing excellence, quality issues, holding daily production meetings ensuring the smooth operation of production.

Engineering and Maintenance Manager

K2 Technology

As Maintenance Engineer, my responsibilities were but not limited to;
Development of appropriate maintenance work instructions for maintenance tasks both mechanical and electrical for all zones (Zones 0,1 and 2);
Ensuring that technical integrity requirements are considered;
Identifying resources, durations and materials requirements for each identified maintenance tasks;
Liaising with the project teams and clients to identify the spares required for each maintenance tasks;
Ensuring that the results of reliability centred maintenance and any other applicable studies are implemented as part of the maintenance task review process;
Ensuring that all statutory requirements have been implemented;
Ensuring that the maintenance task review process captures all the requirements of the facility performance standards.
Ensuring that all scopes of work within the project outlined are within legislation and compliance with regards to Australian standards and company standards.
Working on projects for Santos, Origin and Degremont. These projects ranged from hierarchy build, asset verification, (desk top and onsite). Writing maintenance strategies, maintenance procedures mechanical and electrical, maintenance planning, rebuilding of CMMS systems, RCM and asset criticality. Critical spares analysis, identifying new operational spares requirements or amendments to existing bills of materials and cataloguing current spares. Provide all relevant data for the clients CMMS data base. These projects were for CSG facilities, Water treatment Facilities and Gas Wells.

Projects
Water Treatment CMMS Rebuild, Degremont;
CSG Maintenance Procedure Build, Santos;
CSG Asset Field Verification, Gas Plants, Water Treatment Facilities and Gas Wells Origin, CSG Asset hierarchy build and Meta data capture, Gas Plants, Gas Wells, Water Treatment Facilities and HV Facilities, Origin. (Talinga, Condabri Central, Condabri North, Condabri South, Combabula, Eurombah Creek, Orana and Reedy Creek Gas Plants.)

Maintenance Engineer

Wagners

Managing the maintenance department for the entire plant. A lean manufacturing/maintenance attitude had to be instilled with a mind set change in the maintenance department. Starting with a 5s program and a planned maintenance restructure. This gave the tradesman more direction and responsibility, which resulted in plant uptime to 98%. 
Managing contractors and service contracts for the plant ensuring that the best service and cost was maintained keeping within the departments budget.
Assisting the Operation Manager with materials import, this included the maintenance department supporting the machinery involved as well as maintaining the plant. 
Standing in for the operations manager in his absence. Natural disaster management preparation in order to have minimal damage and cost. 
Shut downs where managed, and a 100% fault free start up. Shutdowns included the maintenance managing tradesmen designated work and contractors. Ball Mill Maintenance, Motor overhaul, Bucket elevator replacement and repair, Material Handling Equipment, Belt conveyors repair, Pumps service where activities of the shut down.

Maintenance Manager

Borgs Panels

Managing two separate manufacturing processes (moulding and paint line) with regards to maintenance, machine up time, fault diagnostics, people management, shut down scheduling, spares development, 5s implementation, project management and lean manufacturing. The maintenance team consisted of 4 tradesmen and 8 preferred contractors.
Promoted to Engineering Coordinator my Responsibilities where:
Managing all maintenance activities, this includes both mechanical and electrical fields. Maintaining the plant with a high uptime, this is supported with implementing continuous improvement activities. Project management and introducing a lean manufacturing ethic by having a mindset change with the tradesmen. Time and people management along with a 5s program was performed daily.

Engineering Coordinator

Toyota Manufacturing South Africa

This position was created purely because Toyota needed someone to drive a team of tradesmen with a new mind set change and attitude towards maintenance within the new paint shop. The paint shop was experiencing a lot of breakdowns in the robotic section, and this was due to maintenance not having enough skill and lack of confidence and the reason to this was that Toyota having new paint application technology, this being Robotic Carousel equipment, Water Bourne paint technology and 2 k paint technology.
My task was to put together a training program, build a workshop for these tradesmen and give them direction. The kaizen team consisted of 4 highly skilled tradesmen, apprentices and trainees, totaling 11 people. We as a team produced training programs, special maintenance for robotics, flow charts to help the maintenance department, build and fabricated a new workshop, (this workshop was known one of the best workshops within the world of the Toyota Group), work procedures, Bom's (Bill of Materials), emergency breakdowns where the maintenance department struggled, Fabrication of special tooling and test equipment for robotic spray equipment, 5's program, Lean Manufacturing, Lean Maintenance, Paint kitchen maintenance, special projects and visual management.

Continous Improvement Manager-Kaizen Team Lead

This was an Autonomous role that allowed me to hone in my skills with regards to quality control against the machinery to the unit produced. I managed 32 people that had to keep to a strict cleaning program of the Robotics within the spray-booths. Any deviation that was made from the cleaning  program  showed up on the units after going through the spay-booth so these people had to be trained by myself in order to achieve good quality work from them, which resulted in no defaults.
- Part of a project team that installed a New Paint Shop
- Assets risk assessments and a contingency plans to be put in place.
- Lean Manufacturing principles to be implemented for action.
- Time performance management for new plant ramp-up.
- Produce maintenance procedures for new equipment
- Introduce a training program to help tradesmen perform their tasks

Technical Expert Quality Specialist

Maintaining a high quality product throughout the paint shop, ensuring that there are no rework and rejects which would have a financial impact to the paint shop budget. Working closely with the laboratory testing new ideas and different paint colours as well as ensuring that the existing materials are within their window of acceptance.
Other Duties included:
- Lead small projects
- Overseas training
- Cost savings
- Lean Manufacturing
- Quality Control
- Oversee all equipment operation reliability

Production Engineer

18 years service to Toyota Manufacturing, started as a :
Maintenance Fitter; paint shop.-
Duties carried out,
- Ensure planned maintenance was performed to my best ability
- Start-up and shut down the entire paint shop
- Standby and callout duties
- Shut down work
- Cross Skilling in Electrical
- New plant installations
- New equipment installation
- Quality control
- TPS/TPM (Toyota Productive Systems/Maintenance)
- Continuous Improvements
- Lean Maintenance Applications
- Projects
- Reactive Maintenance
Equipment Types Varied from:
- Pumps, Pneumatic, Centrifugal, Turbine, Dosing, and Gear type.
- Electrical Motors
- Gearboxes
- Pneumatic systems and controls
- PLC, fault diagnostics
- Conveyors, Floor , Over-head and Oven chain type conveyors
- Gas Systems, Gas fired ovens, Gas farm storage
- Robotics,  Kawasaki, Trinity, Nachi, and Fanuk
- Automated Reciprocators and associated equipment
Special projects included;
- Design, Fabricate, Install a Spray-booth and reciprocators
- Install Paint line systems for spray-booths
- Install mini pray systems for spray-booths and laboratory

Maintenance Fitter

Qld State Maintenance Manager

Profile:

A manufacturing engineering manager specializing in both electrical and mechanical fields, also a results driven manufacturing maintenance kaizen specialist (CI Manager), continuous improvement and project leader with experience across volume manufacturing environments combined with extensive Pneumatics, Robotics, and Automation knowledge. Asset management which includes, maintenance strategies and procedures, bills of materials, CMMS programs and Share Point.

Taplio

Sean D'Alton's Linkedin Analytics

Sean D'Alton

Ready to grow your LinkedIn presence?

Taplio

.css-6ytdur{background-image:linear-gradient(284deg, rgba(39, 43, 72, 1) 0%, rgba(33, 47, 183, 1) 100%);color:transparent;-webkit-background-clip:text;background-clip:text;}Sean D'Alton's Linkedin Analytics

Sean D'Alton

Ready to grow your LinkedIn presence?

Sean D'Alton's Linkedin Analytics